GREENGON
Let Greengon clean all your hard surfaces without resorting to damaging pressure washing or abrasive scrubbing that can cause permanent damage.
Greengon contains totally organic and biodegradable active ingredients.
Greengon is the ideal solution to use on block paving, concrete, brick, stone, flagstones, roof tiles, slates, glass, plastic, paint, decking, AstroTurf, sports grounds, resin surfacing, tarmac and many more.
Directions for use:
For concentrate dilute in a 1-3 ratio of Greengon to water, then apply with a coarse sprayer or watering can in dry conditions and when rain isn’t expected for a few hours. Apply at a rate of around 4-6 m² per litre of solution. Over treating may result in patches or residue forming, this will naturally weather away. Should not be used on untreated metallic or galvanised finishes. We would recommend testing on any material to determine compatibility.
Take care of overspray and run off to lawns, garden areas and ponds as this may cause harm.
We also recommend using non-metallic equipment for application and rinse afterwards.
Results:
The results of Greengon treatment will start to show within a few days and will continue to actively clean and clear for weeks and months after application. On heavily soiled areas more applications may be necessary but must have an interval of at least 7 days.